If you are looking for entry-level metal detectors, the Fisher F22 Vs Garrett ACE300 are some of the most popular metal detectors that you will find in the market or when searching online for the best beginner metal detector. Both metal detectors offer excellent performance for entry-level detectorists. The Garret ACE 300 is an upgrade of the Garrett ACE 250 while the Fisher F22 is an upgrade of the Fisher F2 model.
If you are unable to choose between these two metal detectors, we put them head to head in 5 key features to find out which one is the best. Without much ado, let’s see how these two metal detector models compare!
IN THIS POST
Comparison of Table: Fisher F22 Vs Garrett ACE300
How do Fisher F22 and Garrett ACE 300 Compare?
If you want to know how Fisher F22 and Garrett ACE 300 compare, then you have come to the right place. Read on to know how these two rival metal detectors have in common and what they don’t have.
Detection Modes
Both metal detectors come with different detection modes. When you switch on the Fisher F22, you enter the jewelry mode. When this mode, you will ignore iron while it indicates all the other metal types. When you shift to coin mode, you keep out iron, tabs, and foil segments.
If you intend to hunt for relics or artifacts, you can use the Artifact mode to detect any type of metal. This setting is similar to the ZERO DISC setting found in the ACE 300. In this mode, you can rely on the tone of the 2-digit target ID to determine what your target.
The Garrett features an extra “Relic” mode that enables you to ignore iron or ferrous objects. You can also manually create such a setting on the Fisher F22 by using its custom setting.
Both detectors come with a “custom mode” which you can enable or disable individual segments to suit your hunting needs. When you hold down the PP button on the F22, it allows you to pinpoint a target using the standard coil. The readout will indicate the approximate depth on the 2-digit display. You can do the same on the ACE 300 by using the pinpoint button on the control panel.
You can note that both detectors come with the same set of detection modes, but Garrett as an additional relic mode that locks out the iron. It is a win for Garrett even though by a small margin.
Audio Tones
The Garrett ACE 300 comes with a low tone for ferrous objects and a higher pitch for coins and other types of metals. The ACE 300 also produces a double beep if you hover on two or more coins close to each other or coins that lay on their side. Most detectors lack this type of discrimination or show the two pieces of coins as a single tone.
In contrast to the ACE 300, the F22 enables you to choose your tones for every type of metal category. This feature catapults the Fisher F22 pas the Garrett ACE 300.
Search Coil Options
While the Fisher F22 features a teardrop-shaped 9-inch concentric coil, the Garret ACE 300 comes with concentric 7’ x 10’ PRO Formance coil. The teardrop-shaped coil in the F22 is more effective in areas with a high concentration of iron or trash. Moreover, its waterproof properties make it suitable for use underwater. However, don’t put the control box underwater as well!
On the other hand, the ACE 300’s 7’ x 10’ PROFormance offers slightly better performance since it comes with a detection depth. With the concentric design, you can exchange the coil with a wide range of types of coils from brands.
Weatherproof
Neither metal detector is fully waterproof. However, the F22 is advertised as being completely waterproof. When it comes to usage, you can use the F22 in light rain without any worry. You can do the same with the ACE 300. However, don’t let the ACE 300’s control box wet.
The Fisher F22 comes with electronic parts such as plugs and batteries that have rubber seals which stops water from getting into the unit. Note that these two units are not fully waterproof, and the complete submersion of the control box in water will cause the units to fail.
Volume Control
When hunting the continuous chatter of iron detection can be annoying. For that reason, the Fisher F22 offers the ability to independently control the volumes of the ferrous tone. With this, you increase the clarity of the higher beep that is generated by coins and other types of metals. The ability to control volume also implies that you don’t have to mute the iron tone on the detector like you can in the ACE 300.
Conclusion
Choosing between the Fisher F22 and the Garrett ACE 300 can be a challenging task since both detectors are excellent entry-level metal detectors with great features.
You could like the Fisher F22 with its weatherproof features that can allow you the hunt even in heavy rain without the worry it failing you. It also allows for customization of tones for each kind of target that makes you hunting easier.
You could also like Garrett ACE 300 owing to its slightly larger search coil. You can also like its ability to detecting items that are slightly deeper than what the F22 detects. It can also discriminate against the coins that lie on their side or even close together to generate double beeps.
As you can see, making a decision on which metal detector you can choose between the two boils down to personal preference.
Related Posts
- Best Metal Detector Under 300
- Does aluminium set off metal detectors?
- Garrett AT Pro vs Max Metal Detector: Which is the Best?
- The 10 Best Pulse Induction Metal Detector
- The 10 Best Metal Detector for Kids (Reviews & Guides)